The Airlinks adjustable front lift sensors for the Lamborghini Huracan correct the geometry of the front lift sensors after the car has been lowered using the corresponding springs or Coilover Kit. Lowering the car can cause the front lift sensors to move outside their expected reference position, resulting in the magnetic suspension displaying an error message: the message ‘lifting failure’ appears on the display and the red lift icon starts flashing. This occurs, for example, after fitting lowering springs such as those from Novitec. The adjustable links allow you to reset the sensor position within the required operating range, without the need for software programming.
The links click onto the original factory ball joints and are length-adjustable, ensuring the mechanical sensor position is correct again. The fitment is fully reversible: the original sensor links can always be refitted. Suitable for all Lamborghini Huracán models, including the Huracán (2015+), Huracán Performante (2017+), Huracán STO (2020+), Huracán Tecnica (2022+) and Huracán Sterrato.
Features
- Vehicle-specific fit, developed for the Lamborghini Huracan’s front lift system
- Suitable for all Lamborghini Huracan models
- Adjustable sensor geometry, precisely adjusts the link length after lowering the chassis
- Resolves the ‘lifting failure’ error message and the flashing red lift icon on the magnetic suspension
- direct fit, clicks onto the original factory ball joints
- No coding required; corrects the mechanical sensor position
- Reversible; the original links can be refitted
- Fitting normally takes around 30 minutes
- The wheels do not usually need to be removed
Technical specifications
- Manufacture: precision-manufactured in Taiwan to our own specifications
- Central adjuster: precision-machined aluminium
- Link ends: corrosion-resistant stainless steel
- Securing: mechanical lock nuts and metal safety clips
- Dimension control: critical dimensions measured using measuring equipment with a resolution of 0.001 mm
- Coding required: no
Contents of the set
- Two Airlinks adjustable front lift sensor links for the front axle
- Safety locking hardware
- Fitting and adjustment instructions
- Installation instructions
Frequently asked questions
What are these front lift sensor links for?
These links correct the geometry of the front lift sensors after the car has been lowered using the corresponding springs or Coilover Kit. You adjust the link length so that the sensor position falls back within the required operating range and the ‘lifting failure’ warning from the magnetic suspension disappears, without the need for software coding.
Do these links fit all Huracan models?
Yes. The links are suitable for all Lamborghini Huracan models, including the Huracan, Huracan Performante, Huracan STO, Huracan Tecnica and Huracan Sterrato.
Why does the ‘lifting failure’ warning appear?
After lowering the car, for example following the fitting of lowering springs such as those from Novitec, the magnetic suspension may display the ‘lifting failure’ warning and the red lift icon will start flashing. The adjustable links restore the sensor position to within the required operating range.
Do these links lower the car?
No. The springs or Coilover Kit determine the ride height. These links correct the reference point of the front lift sensor after the car has been lowered.
Is software programming required?
No. The adjustment is mechanical and works by correcting the geometry of the sensor link.
Can the original set-up be restored?
Yes. The fitment is reversible and the original sensor links can be refitted.
How long does the fitting take?
Fitting normally takes about 30 minutes and the wheels do not usually need to be removed. Always check that the front lift system and warning display are working correctly before driving the car.
